Raising awareness

Posted: Monday 19th August 2013

European legislation, which will cut the permissible levels of lead in drinking water, will come into force in December 2013. At present, the allowance is 25 micrograms to one litre of water; this will be reduced to 10 micrograms per litre.

Lead is used in the manufacture of many plumbing pipes and fittings, including copper, brass and some plastics. John Griggs, Principal Science Officer for the Chartered Institute of Plumbing and Heating Engineering (CIPHE) is concerned that the new legislation may catch out some manufacturers.

“Manufacturers and suppliers of plumbing materials need to be aware of the issue and action may need to be taken to ensure that their products meet all the relevant UK and European Legislation. Installers need to be conversant with the facts and not do anything that impacts upon the quality of the supplied water.”

Although the water supplied to a building may be ‘wholesome’, the plumbing fittings within the building can degrade the quality. Testing for levels of contaminants in drinking water will be carried out at the consumer’s taps, not the boundary of the property.

There are health risks relating to the way lead can build up in the body. Infants and children are the most vulnerable to the effects of lead due to their low body mass and developing organs. It could impact on mental development and may also be a factor in behavioural problems.

John would be very interested to hear from manufacturers involved with pipes and fittings to find out what they have done to reduce levels of lead in their products. John can be contacted on email at johng@ciphe.org.uk




Read the magazine online

December 2018

About the magazine »
Magazine archive »


Advertisements

Information for advertisers »

Pulsar New Banner
British Water Prominent Fluid Controls Verder Pulsar Button June 13 Huber Harvey Communications Water Aid buttonwood marketing wateractive
ATI UK