Articles & Case Studies

Polypipe bolsters flood defences at new £2.7m medical centre

Posted: Tuesday 16th October 2018

Polypipe has helped to protect a new £2.7 million medical centre from flash floods.

The Loughborough-based company supplied its Polystorm and Permavoid geocellular water management systems to the 1,191sqm Churchdown Surgery in Churchdown, Gloucestershire.

Building on the initial design by the contract engineer Rutter Johnson, Polypipe worked with consultant engineering firm EPG, and civil engineer and installer NGB Cheltenham, to review and value-engineer a solution capable of negotiating various onsite challenges, including an extremely high water table.

Using the combined design and installation experience of the team, a mixed product solution was supplied by Polypipe that included a Permavoid system for use beneath a large permeable paving car park and two Polystorm tanks utilising anti-floatation measures in soft landscape areas.

Due to the high water table, a 150mm deep system using 2,614 Permavoid cells delivered 138m3 of stormwater storage beneath the hard landscaping surface. Permavoid was also selected due to its high structural load capacity. Polypipe, EPG and NGB had to tend with a water table that left only 130mm of cover in large hard landscaped areas, which meant a shallow attenuation system was required.

In addition, 200 Polystorm PSM1a crates were used in soft landscaped areas, which provided a further 40m3 of water storage. Due to the high water table, both Polystorm attenuation tanks installed beneath the landscaped areas surrounding the car park were wrapped in a fully welded impermeable geomembrane. Both systems are designed to cope with and manage sudden heavy rainfall, which has affected the region in the past decade.

To treat oil and capture silt, 35m of Permachannel, Permavoid Biomat and four Permaceptor separators were used to channel the collected stormwater away from the site and into local water networks.

Following consultation with EPG and NGB, Polypipe delivered a customised Permaceptor much larger than the standard model to manage greater amounts of stormwater collected from the overall water management system.

Each modified Permaceptor can treat a larger catchment area over 150sqm and was installed to reduce the amount of Permachannel and Permavoid Biomat cells needed within two isolated permeable car park areas separated from the Permavoid tank.

As well as this the main Permavoid tank beneath the car park area had a fully welded membrane to the base and sides.

Phil Williams, consultant engineer at EPG, said:

“This project provided objectives that we knew Polypipe could deliver upon. With only 130mm cover on the car park we chose to use Permavoid beneath the car parking bays because of its load bearing capability, and the ability of the system to negotiate the high water table on the site.

“By working with Polypipe’s technical experts, we were able to design a system that could be considered ‘good practice’ by the SuDS manual, local and national planning documents.”




Read the magazine online

December 2018

About the magazine »
Magazine archive »


Advertisements

Information for advertisers »

NO DIG 2018
Huber Prominent Fluid Controls British Water Water Aid Pulsar Button June 13 Harvey Communications buttonwood marketing Verder wateractive
Pulsar New Banner